Tips and Tricks

Tech bulletins for a variety of machine tool lines and controls




To view these files you must have Adobe Acrobat Reader on your computer.  If you do not have it, you can download it for free. Click the button below in order to download Acrobat Reader.

All of the tips and tricks presented here are living documents.  That means that they're always being updated.  If you would like to submit an article or suggest a change please sent it to
ATC Adjustment for 510
Restoring Memory on an Excel with a Fanuc 0
Restoring the Memory on an Excel CNC with Fanuc 0 Control
Rigid Tap Troubleshooting on Excel 510
Adjusting the Drawbar Collar on an Excel 510
Emergency Stop / Not Ready Alarm
Adjusting the Spindle Orientation on a Fanuc 0
Setting the Parameters on an S-Series Spindle
 16-18-21 Trace Function Form
 Backup and Restore Memory on 0 Controls
 Changing Parameters on a 0 Control
 Changing Parameters on a 21 Control
 Using Binary Logic
 M-Code Example
Fanuc 10M Resetting Memory for Kiwa Machines
Kiwa 1200 & 4L ATC
Restoring Memory on Kiwa 1200 4L with Fanuc 10M
 Memory Backup and Restore on New Berlin Machine
 Alarm #2007
 All Parameters Lost
 Auto Set of Work Offsets
 Avoid Drill Hole Define Cycle
 Cannot Program X0Y0 in MDI
 Change Keep Relay
 Change Machine Position Inch Metric
 Data Table Setting
 Decrease Rigid Tapping
 Emergency Stop Recovery
 External M-Code Finish Timers
 Feed an Axis Without Running the Spindle
 Frequent Z-Axis Overtravel
 Inch to Metric Mode
 Jog to G30 Position
 M99 Jump Command
 Macro Loading Procedure
 Overload on all Axis
 Pallet Change Recovery
 Reference Zero (0MC or OM)
 Reference Zero
 Rewind Program in Auto Mode
 RS232 Cable
 RS232 Parameters
 Servo Alarm Troubleshooting
 Setting Parameter Write Enable
 Special Tool Select
 Spindle Checking Procedure
 Spindle Orientation Alignment
 SRAM Control Backup
 SRAM Data Loading
 Tool Change Program

Terms of Use / Disclaimer


The information on this site is provided free of charge.  It is intended for use by trained service personnel.  If you are not qualified to perform any of the task described here it is your responsibility to contract with a certified repair organization.   It is the responsibility of the user to follow normal safety procedures.  Shoprag, nor any other contributors to this site, assume any responsibility for injury or monetary loss resulting from the information provide here.