Instructor Lead Training

Current Class Openings

(Click for pdf descriptions)

 

•   CNC Troubleshooting (Fanuc Controls)

•   Advanced Fanuc Troubleshooting

•   Advanced Fanuc Ladder Logic

Open Enrollment & On-site

 

 

Our instructor led training classes cover beginner to advanced level training. Class sizes are typically limited to eight people. John Robbins, the author of Mech/Tech- CNC Troubleshooting, will be leading most classes.

 

A hands- on approach is emphasized. We begin by bringing in the proper equipment. A fully functional table, using box and linear guide ways, is used to demonstrate machine too l construction and the problem areas. This table is controlled by a modern Fanuc 32i control and servos. This, along with other training aids, provides the students with a complete picture of machine tool problems and how to go about diagnosing them.

 

Please take a look at our course descriptions to decide which is right for you. It is not necessary to take the classes in the order shown if you have the proper experience. All classes can be customized to your needs.

 

Open Enrollment

 

We have open enrollment classes at various locations around the country. This allows you to send one or more people to a training class. These classes are sponsored by various training organizations. If you would like to attend one of them please take a look at the calendar for the current class schedule and pricing. If you are interested in hosting a class please contact us for more information.

On-Site Training

 

Most of our classes are taught at the customer location. We charge a flatrate based upon the amount of training desired. This flat rate will cover all training, equipment, transportation and travel expenses. There will be no surprise charges. Rates will vary by location and time of year. For an on-site training classes please contact us to confirm availability and pricing for your area. We will supply you with a list of on-site requirements regarding the class. Please check our Training Calendar for special discounts in some areas!

 

 

Copyright © 2018 | All Rights Reserved

Open Enrollment & On-site

 

 

Our instructor led training classes cover beginner to advanced level training. Class sizes are typically limited to eight people.John Robbins, the author of Mech/Tech- CNC Troubleshooting, will be leading most classes.

 

A hands- on approach is emphasized. We begin by bringing in the proper equipment. A fully functional table, using box and linear guide ways, is used to demonstrate machine too l construction and the problem areas. This table is controlled by a modern Fanuc 32i control and servos. This, along with other training aids, provides the students with a complete picture of machine tool problems and how to go about diagnosing them.

 

Please take a look at our course descriptions to decide which is right for you. It is not necessary to take the classes in the order shown if you have the proper experience. All classes can be customized to your needs.

 

 

  

 

 

Current Class Openings(Click for pdf descriptions) •   CNC Troubleshooting (Fanuc Controls)•   Advanced Fanuc Troubleshooting•   Advanced Fanuc Ladder Logic

 

Open Enrollment

 

We have open enrollment classes at various locations around the country. This allows you to send one or more people to a training class. These classes are sponsored by various training organizations. If you would like to attend one of them please take a look at the calendar for the current class schedule and pricing. If you are interested in hosting a class please contact us for more information.

 

 

Open Enrollment & On-site

 

 

Our instructor led training classes cover beginner to advanced level training. Class sizes are typically limited to eight people.John Robbins, the author of Mech/Tech- CNC Troubleshooting, will be leading most classes.

 

A hands- on approach is emphasized. We begin by bringing in the proper equipment. A fully functional table, using box and linear guide ways, is used to demonstrate machine too l construction and the problem areas. This table is controlled by a modern Fanuc 32i control and servos. This, along with other training aids, provides the students with a complete picture of machine tool problems and how to go about diagnosing them.

 

Please take a look at our course descriptions to decide which is right for you. It is not necessary to take the classes in the order shown if you have the proper experience. All classes can be customized to your needs.

 

 

  

 

 

Current Class Openings(Click for pdf descriptions) •   CNC Troubleshooting (Fanuc Controls)•   Advanced Fanuc Troubleshooting•   Advanced Fanuc Ladder Logic

 

Open Enrollment

 

We have open enrollment classes at various locations around the country. This allows you to send one or more people to a training class. These classes are sponsored by various training organizations. If you would like to attend one of them please take a look at the calendar for the current class schedule and pricing. If you are interested in hosting a class please contact us for more information.

 

LOUISVILLE, KY

Intellect Controls Group

Michael Albensoeder

502-499-7522

email

 

NASHVILLE, TN

Tennessee Industrial Training

Becky Sargent

615-471-9450

email

 

DETROIT, MI

Tennessee Industrial Training

Becky Sargent

615-471-9450

email

 

CLEVELAND, OH

Cleveland Industrial Training

Tim Duffy

216-459-9292

email

 

On-Site Training

 

Most of our classes are taught at the customer location. We charge a flatrate based upon the amount of training desired. This flat rate will cover all training, equipment, transportation and travel expenses. There will be no surprise charges. Rates will vary by location and time of year. For an on-site training classes please contact us to confirm availability and pricing for your area. We will supply you with a list of on-site requirements regarding the class. Please check our Training Calendar for special discounts in some areas!